Growlink Batch TankLINK pH Sensor Odor Control + Filters mixed with water

mixed with water

The 4 x 4 ft flowering footprint targets sealed-room production builds

so an existing solution needs no re-correction after it goes in

6 to 21 gpm (10 - 80l/min) with a head up to 158 ft (48

Growlink Batch TankLINK pH Sensor Odor Control + Filters mixed with waterReading Acidity with the Growlink Batch TankLINK pH Sensor The Growlink Batch TankLINK pH Sensor reads nutrient solution acidity inside a batch tank or reservoir in real time. The probe covers the full 014 pH range at 0. 02 pH accuracy with 0. 01 pH resolution. A 10 foot cable runs from the sensor to the Batch TankLINK controller. The cable terminates on a BNC connector that pushes onto the controller port. A quarter turn clockwise locks it in place.