SESHIN BUFFALO Diagonal Cutting Nippers Non-Sparking One-Handed Clamp 5 kA at 400/415 V

5 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 60 A at 50 °C Protection type Short-circuit protectionOverload protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 8500 cycles Electrical durability Category A: 1500 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 25 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 130 mm Width 75 mm Depth 60 mm Environment Standards GB/T 14048

0 ※ grip: ● = elastomer □ = plastic spring

Type of Product : Single Row Tapered Roller Bearing Inside Diameter (d) (mm) : 110 Outside Diameter D (mm) : 200 Width Dia mm : 53 Model No : 32222U

including leather cutting protection

SESHIN BUFFALO Diagonal Cutting Nippers Non-Sparking One-Handed Clamp 5 kA at 400/415 VSESHIN BUFFALO Diagonal Cutting Nippers Non Sparking Cutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material. Key Features Hardened cutting edges for repeated use Cutting capacity varies by model see specifications Specifications Size 6 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size. About SESHIN BUFFALO Seshin